Maintenance and repair Bornemann W7T

Complete maintenance and repair of your Bornemann W7T screw pump

W7T is a typical transfer pump. It is used to pump oils and other viscous media. They are mostly used in tank farms or for loading and unloading ships. They are exposed to the weather and, depending on where the ships are used, also to salt water. External damage must therefore also be checked during maintenance.

But first we disassemble your pump into its individual parts. We then clean and examine the individual components. Defective or worn parts will be replaced or repaired by us. In most cases, we mainly replace common wear parts such as seals and clamping nuts. If necessary - or at your request - also conveyor screws, shafts and liner. We then assemble and test the pump according to our strict maintenance guidelines.

If you like, we can finish the pump off with a shiny new paint job. It makes it look like new again! We also recommend a new coating to preserve your pump and to be able to quickly detect any defects and contamination that may occur.

After that, the pump has good performance again and a long service life. Almost comparable to that of a new pump!